In Stock Products
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$28.00
Humbrol: Gloss Clear Varnish (125ml)
A thin clear varnish that goes on clear and stays clear. A water soluble, self-levelling medium in either gloss, matt or satin that can be used to prepare surfaces. Gloss varnish can be used to prepare surfaces for decals and to improve the appearance of clear parts.
Specifics:
Type: Varnish / Coating
Substrate: Enamel and Acrylic Paints.
Cleaning: Water
Drying Time: Surface dry in 30 mins. Recoat once dry. Avoid temperature change during application and drying time.
Application: Shake well before use some settlement may occur. Apply thinly with a brush or airbrush. To achieve a higher level of the desired finish, apply additional coats. Do not use in temperatures below 15C or in conditions of high humidity to avoid the appearance of a cloudy finish once dry.
Humbrol: Gloss Clear Varnish (125ml) A thin clear varnish that goes on clear and stays clear. A water soluble, self-levelling...
$80.00
A must for every modeller. The Humbrol Workstation is manufactured from a tough and durable material that can't be melted by Humbrol Poly Cement. Dimensions: height 67mm x width 485mm x depth 335mm (height 2.64 inches x width 19 inches x depth 13 inches) Suitable for use with Humbrol A4 Cutting Mat: AG9155. The Humbrol Work Station has many features: Double depth sections for holding 9 x 14ml/12ml Humbrol Enamel or Acrylic pots, or 3ml Humbrol Acrylic pots. Double depth water cup holders, which allows the modeller to place Humbrol 28ml products, such as: Mattcote, Satincote and Glosscote, Decalfix, Maskol, Clearfix, Thinners, Liquid Poly and Weathering Powders. Designed to fit the new Humbrol A4 Cutting Mat (AG9155) within the working area. Two mixing areas either side of the Cutting Mat. A4 Instruction sheet holder. Brush and tool holders. Easy to hold handles either side of the Work Station. Rubber feet, which...
A must for every modeller. The Humbrol Workstation is manufactured from a tough and durable material that can't be melted...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$16.50
A solvent-based cement suitable for plastic model kits only.
The product is a low viscosity version of Humbrol Poly Cement to enable application by brush.
Substrate: Common plastics used to manufacture model kits including polystyrene and ABS. The product works by melting the plastic on application and 'welding' two glued pieces of plastic together to form a strong bond.
Coverage: Depends on thickness of application.
Application: Directly onto plastic model kits. An integral brush is supplied. A cocktail stick can be useful to apply sparingly to small areas or fine details.
Drying time: Surface dry in 10-20 minutes. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity.
How to clean: Can be removed if not fully dry by re-dissolving with more Liquid Poly or Poly Cement. Permanent once dry.
A solvent-based cement suitable for plastic model kits only. The product is a low viscosity version of Humbrol Poly...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$17.90
Usage: For thinning down of solvent-based enamel paints, most commonly for airbrushing.
Application: As for the paint being used.
Drying Time: Paint drying times may vary with the addition of Enamel Thinners.
Usage: For thinning down of solvent-based enamel paints, most commonly for airbrushing. Application: As for the paint being used. Drying Time: Paint...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...