Kits Scrapbooking, Cards, Diamond Dots & Airfix Models
Product Categories
Out of Stock
Humbrol #AA9060 Enamel Metallic Paint & Brush Set The Paint & Brush Sets are for those wanting a good concise selection of paints and brushes in one easy purchase. These sets are particularly helpful for anyone using these excellent paints for non-plastic modelling hobbies and tasks. x3 Brushes Enamel paint - 1 Grey Primer; 2 Emerald; 14 French Blue; 18 Orange; 19 Bright Red; 21 Black; 22 White; 69 Yellow. A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour) SubstrateA wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage14ml tin covers approx. 0.3m² depending on thickness of application ApplicationBrush straight from the tin. Airbrush with...
Humbrol #AA9060 Enamel Metallic Paint & Brush Set The Paint & Brush Sets are for those wanting a good concise...
Out of Stock
Humbrol #AA9063 Enamel Creative Paint & Brush Set The Paint & Brush Sets are for those wanting a good concise selection of paints and brushes in one easy purchase. These sets are particularly helpful for anyone using these excellent paints for non-plastic modelling hobbies and tasks. x3 Brushes Enamel paint - 36 Pastel Green; 37 Bright Green; 42 Violet; 44 Pastel Blue; 46 Orange; 57 Pink; 58 Magenta; 99 Lemon. A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour) SubstrateA wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage14ml tin covers approx. 0.3m² depending on thickness of application ApplicationBrush straight from the tin. Airbrush with...
Humbrol #AA9063 Enamel Creative Paint & Brush Set The Paint & Brush Sets are for those wanting a good concise...
Out of Stock
A solvent-based enamel paint with a special metallic finish which can be polished.
Application: Brush straight from the tin or Airbrush with a suitable thinner such as Humbrol Enamel Thinners.
Two thin coats are preferable to one thick coat. Note that Metalcote colours are designed to be polished when fully dry.
Drying Time: Metallic hard dry in approx 10 days.
Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably over night).
A solvent-based enamel paint with a special metallic finish which can be polished. Application: Brush straight from the tin or...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
Out of Stock
The US Sikorski H-19 Chickasaw was an aircraft that was the envy of the world, with the British military being particularly keen admirers. A licence agreement was signed to allow Westland Aircraft based at Yeovil to produce the helicopter for British service. Named the Whirlwind, the first British built prototype flew in August 1953, with the type going on to enter the Royal Navy sevice in July 1954.
Scale 1:72.
Number of Parts: 49
Dimensions (mm): L242 x W224.
The US Sikorski H-19 Chickasaw was an aircraft that was the envy of the world, with the British military being...
Out of Stock
An aircraft which has often been described as 'Australia's panic fighter', the decision to build the indigenous Commonwealth Aircraft Corporation Boomerang came in the wake of continued Japanese aggression in the Pacific and the need to ensure a continuous future supply of new fighters for the RAAF. By using many sections and components from existing aircraft types under construction in Australia, the first Boomerang was produced just sixteen weeks after the original design decision was made and 250 of these diminutive fighters would eventually be produced. Possessing excellent low altitude performance, the Boomerang would often be used to mark targets for ground attack Corsairs during the latter stages of WWII, a role which earned the distinctive little aircraft the nickname 'Smoky Joe'.
Scale 1:72.
Number of Parts: 31
Dimensions (mm): L107 x W152.
An aircraft which has often been described as 'Australia's panic fighter', the decision to build the indigenous Commonwealth Aircraft Corporation...
$29.90
The F-80C Shooting Star relied heavily on early jet technology supplied by the British. The Lockhead Shooting Star was initially developed around the British Halford H.1 engine taken from the de Haviland Vampire prototype. The project advanced under the strictest secrecy, with a team from Lockheed's "Skunk Works" producing an airframe in an impressive 143 days.
Scale 1:72.
Number of Parts: 51
Dimensions (mm): L146 x W164.
The F-80C Shooting Star relied heavily on early jet technology supplied by the British. The Lockhead Shooting Star was initially...
$29.90
The handsome Beagle B.206 Basset was a twin-engined light executive transport and military communications aircraft built by the Beagle Aircraft Company at their Shoreham base and held the potential of being a huge global success, but for a number of reasons, would only be built in relatively small numbers.
Scale 1:72.
Number of Parts: 47
Dimensions (mm): L142 x W192.
The handsome Beagle B.206 Basset was a twin-engined light executive transport and military communications aircraft built by the Beagle Aircraft...
Out of Stock
During the final months of WWII, an increasingly desperate Luftwaffe introduced the world's first operational jet fighter, which represented a huge advancement in aviation technology and threatened to overturn Allied air superiority. Despite being 100mph slower than the German jet, the superb North American Mustang fighter was available in great numbers and hunted the Me262 mercilessly, picking them off in the air and on the ground.
The Large Starter Set includes: 2 brushes, 1 Poly Cement and 8 acrylic paints - all that is needed to complete a fabulous first kit!
Scale 1:72.
Number of Parts: 66.
Dimensions (mm): L148 x W174.
Suitable for ages 8yrs+.
During the final months of WWII, an increasingly desperate Luftwaffe introduced the world's first operational jet fighter, which represented a...
Out of Stock
The ARToptions Spice range has stunning coloured papers, in bright pinks, purples, oranges and rich browns, perfect for all those Autumn photos and more.
These Brand New Page Kits have become a huge seller as they bring together exclusive elements and the style you have come to know and love from 49 and Market.
The Vintage Artistry Sunburst Ultimate Page Kit includes:
- 4 sheets of exclusive 12x12” patterned papers; - 4 sheets of 12x12” laser cut elements; - 12x12“ sheet of thin adhesive-backed chipboard shapes; - 19 assorted buttons; - 4m of waxed cord; - 4 mini metal clips; - 2 string enclosures.
Be inspired by completed project samples that can be replicated or make your own. Slight variations may occur.
Papers are heavy weight cardstock. Acid free. Designed by Katie Pertiet for 49 and Market.
The ARToptions Spice range has stunning coloured papers, in bright pinks, purples, oranges and rich browns, perfect for all those...
Out of Stock
Humbrol #107006 Model Filler
Fills hairline cracks and gaps between plastic parts. The product can be sanded when fully dry using a fine grade of sandpaper and painted.
Application: Directly onto subtrate without excessive application of product. If gaps are deep two thin coats are preferable to one thick coat.
Drying Time: 20 – 30 minutes.
Drying times will vary according to ambient temperature and humidity.
This pack contains 1 tube of Model Filler - 31ml
Humbrol #107006 Model Filler Fills hairline cracks and gaps between plastic parts. The product can be sanded when fully dry...
Out of Stock
On the 26th November 2003, the last British Airways Concorde G-BOAF flew low over her birth city of Bristol, before landing at the Filton airfield factory site where she had been built just 24 years earlier. She would be the last Concorde to fly, effectively bringing to an end the historic era of supersonic passenger aviation.
Set Includes: 6 Acrylic Paints, 2 Brushes, 1 Poly Cement.
Length: 425mm
Width: 180mm
Pieces: 52
Skill Level: 2
Ages: 8+
On the 26th November 2003, the last British Airways Concorde G-BOAF flew low over her birth city of Bristol, before...
Out of Stock
The A27M Cromwell Mk.IV was the most heavily produced version of the new Cruiser Tank Mk.VIII and matched the Centour hull with the highly effective Rolls Royce Meteor engine (A27Meteor), which allowed the tank to travel at impressively high speeds. The tank also featured a quick firing 75mm gun, which was a re-bored version of the British 6 pounder gun and allowed the commandeer to have the option of using American produced armour piercing or high explosive rounds. Although originally introduced in November 1943, persistent problems with the new gun's operation meant that the Mk.IV would not make its combat introduction until the Normandy landings in June 1944, where its speed and mobility would complement the Sherman tanks, which were available in greater numbers. Age: 8 years and up Model No: A67209 Approx package dimensions: 37 x 26 x 6 cms Scale: 1:35 Approx finished model dimensions: 18x7x8 cm Paint...
The A27M Cromwell Mk.IV was the most heavily produced version of the new Cruiser Tank Mk.VIII and matched the Centour...
Out of Stock
The Boulton-Paul Defiant was the only "Turret Fighter" to enter service with the RAF. The Defiant used the philosophy that a fighter aircraft, armed soley with a turret bristling with machine guns would be able to enter a bomber stream causing havoc and the turret would also enable it to defend itself from enemy fighters. During its first few engagements during the Battle of Britain in 1940, enemy pilots were taken by surprise and the Defiant fared well but soon the Lutwaffe pilots worked out its weaknesses, especially the lack of forward firing guns and the Defiant was soon relegated to night fighting duties were it fared better.
Scale 1:72.
Number of Parts: 70
Dimensions (mm): L150 x W166.
The Boulton-Paul Defiant was the only "Turret Fighter" to enter service with the RAF. The Defiant used the philosophy that...
Out of Stock
The Vintage Artistry Sunburst collection is brimming with bold colour sure to make a splash. This collection is ideal for tropical vacations or good old fashion summer fun. These Brand New Page Kits are sure to be a huge seller as they bring together exclusive elements and the style you have come to know and love from 49 and Market. The Vintage Artistry Sunburst Ultimate Page Kit includes: - 4 sheets of exclusive 12x12” patterned papers; - 4 sheets of 12x12” laser cut elements; - 12x12“ sheet of thin adhesive-backed chipboard shapes; - 25 assorted buttons; - 5 mini wooden clips; - 2 mini metal clips; - 3m of bakers twine; - 2 bows; - one sheet of enamel dots. Be inspired by completed project samples that can be replicated or make your own. Slight variations may occur. Papers are heavy weight cardstock. Acid free. Designed by Katie Pertiet for...
The Vintage Artistry Sunburst collection is brimming with bold colour sure to make a splash. This collection is ideal for...
Out of Stock
The Vintage Artistry Sunburst collection is brimming with bold colour sure to make a splash. This collection is ideal for tropical vacations or good old fashion summer fun.
These Brand New Cluster Kits are filled with bits to create 4 clusters as shown on packaging or mix and match to make your own.
The Vintage Artistry Sunburst Cluster Kit includes: - 4 sheets of 6x12” laser cut elements; - 1 sheet of 6.25x12“ adhesive backed thin chipboard elements; - 5 pieces of ephemera; - 15 assorted buttons; - 8 mini wooden clips; - 3m pink waxed cord; - 1 sheet of blue enamel dots.
Be inspired by completed cluster samples that can be replicated or make your own. Slight variations may occur.
Designed by Katie Pertiet for 49 and Market.
The Vintage Artistry Sunburst collection is brimming with bold colour sure to make a splash. This collection is ideal for...
$22.90
$44.90
Create your own room decor for every holiday or special occasion! Follow the simple template included in each kit to create an adorable, dimensional piece of art.
These fit in an 8x8 shadow box frame - sold separately (coming soon). Swap out your inserts to suit each occasion or create a stunning wall display of them all.
These shadow box kits will make a perfect gift (if you can part with them).
This package contains Doodlebug Shadow Box Insert Kit - School Days.
Create your own room decor for every holiday or special occasion! Follow the simple template included in each kit to...
$6.20
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
Out of Stock
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
Out of Stock
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$7.90
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits.
Application: Brush straight from the tin.
Drying time:
Gloss: 1 – 2 hours.
Matt & Satin: 20 – 40 minutes touch dry, up to 24 hours for hard dry.
Metallics: Hard dry in approx 10 days.
A 14ml enamel tinlet of solvent-based, fast-dry paint developed for use on plastic model kits. Application: Brush straight from the...
$16.50
A solvent-based cement suitable for plastic model kits only.
The product is a low viscosity version of Humbrol Poly Cement to enable application by brush.
Substrate: Common plastics used to manufacture model kits including polystyrene and ABS. The product works by melting the plastic on application and 'welding' two glued pieces of plastic together to form a strong bond.
Coverage: Depends on thickness of application.
Application: Directly onto plastic model kits. An integral brush is supplied. A cocktail stick can be useful to apply sparingly to small areas or fine details.
Drying time: Surface dry in 10-20 minutes. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity.
How to clean: Can be removed if not fully dry by re-dissolving with more Liquid Poly or Poly Cement. Permanent once dry.
A solvent-based cement suitable for plastic model kits only. The product is a low viscosity version of Humbrol Poly...