Siser Heat Transfer Vinyl - Stripflock Pro - Anthracite (A4 Sheet)
Product Code: S-0061
Plotter cut flock material with brilliant colours, suitable for cotton, polyester, poly/cotton blends (not suitable for dye sublimated fabrics). Adhesive polyester carrier. Super soft which makes it perfect for baby and childrens clothing.
Stripflock Pro cannot be layered on itself.
• Mirror cut the material
• Weed excess material
• Place it on the garment with its polyester carrier
• Heat apply at the conditions shown below
• Remove the carrier warm
Wait at least 24 hours from application before washing. Washing resistance up to 60°C, best inside-out.
Do not use bleach or other aggressive chemical agents.
Do not dry clean. Suitable for tumble dry, cotton cycle.
Heat Transfer settings: 15 seconds at 155°C (311°F) medium pressure (3-4 bar)
Suggested Cutting Sttings Blade: 60° Pressure: 80 gf Speed: 15 cm/sec
Average thickness: 500 microns
The product is REACH compliant The product is certified Öko-Tex® Standard 100 Class I
NB: all information given in this sheet is based on Siser's experience We recommend to always perform a test before starting standard production